Product Description
2 3/8" OD Steel Swing Hanger w/ Shackle Pendulum and Dacromet Finish
This is a steel swing hanger with a dacromet finish and a shackle pendulum, opening 1/2″ wide. These hangers are cast in two halves. The lower half of the swing hanger body has a shackle pendulum with a sintered bronze bearing incorporated into it to reduce wear. These bearings do not need to be oiled as the bronze is impregnated with oil. It has a .51 ID oil light bearing and axle bolt with lock tight nut and accepts a 12mm bolt. The pendulum is 1” wide and has a shackle with bolt so that there is no need for a connecting S-hook. The shackle pendulum is tamper resistant. It requires an allen wrench with a special pin hole head. The two halves of the hangers are bolted together with a 12mm carriage bolt and a hex lock tight nut. The pendulum is held to the hanger with a #12 axle bolt with a long shoulder, so the bearing does not ride on the threads. It also has a lock tight nut. This hanger fits a standard schedule 40 two inch pipe. Do not torque more than 25ft-lbs. when installing. This product should last 2 years in harsh conditions and up to 5 years in optimal conditions. Some conditions may require replacement sooner. Tensile strength is 7900 lbs. Sold as each.
- Steel Swing Hanger and a shackle pendulum with a dacromet finish cast in 2 halves.
- Sintered bronze bearing incorporated into it to reduce wear.
- Pendulum is 1'' wide and tamper resistant.
- Swing hanger fits a standard schedule 40 2-inch pipe.
- Sold individually.
