Product Description
Toddler Swing Seat - Rubber Bucket Seat
Commercial Grade - Made in USA
This is a fully enclosed one piece toddler seat that helps prevent small children from falling out. The dimensions of the seat are 39'' circumference, 9.5'' deep, the front leg opening is 5'' with the back opening at 4.75'' to provide enough room to be comfortable sitting. It is made with a steel insert that is encased in 70duro EPDM rubber with heavy duty rust resistant welded triangular hardware. EPDM: Ethylene-propylene-diene-monomer is a synthetic rubber material which helps prevent crazing, cracking and oxidizing, made especially for these swing seats. The rubber does not rub off on children’s clothes, and the seats last much longer than natural rubber swings. Unlike seats made of polymer, seats made of EPDM rubber hold up well in extreme temperatures, both very hot and very cold. The one piece steel insert is not used in most other swing seats either, but we feel that the strength of the seat is greatly increased. Galvanized steel triangles and steel plates are riveted to the seat with galvanized rivets. Each triangle is welded together so they cannot be pulled apart and pulled off the seat. The triangle is constructed of 3/8'' diameter cold rolled steel with the ends welded together. The plate is 1/16'' thick h.r. stamped galvanized steel. The rivets which are used to rivet the plate through the EPDM rubber and steel insert are made of ¼'' diameter steel, with three rivets on each side of the seat. The S100 toddler seat has a 1075 steel insert, full hard, painted with a non-rusting adhesive, and then coated with rubber that is from ¼'' to 3/8'' thick. This helps prevent a child from being cut if the rubber is ever torn off a seat, not offered by other companies. We believe our seats are made to the highest standards available. Customers cannot see many of the extra hidden safety features that set these seats apart. We feel that these safety features benefit the strength of these swings and the well-being of the children that use our equipment. Tensile strength is 5300 lbs. Seat only.
- EPDM Rubber one piece full bucket toddler seat with steel insert.
- EPDM rubber prevents cracking and holds up well in extreme hot and cold temperatures.
- Galvanized steel triangles of 3/8-inch diameter cold rolled steel.
- Age range: 2-3 years.
- Color choice for toddler swing seat.
- Dimensions: 9'' H inside seat; 17.6'' H total seat; 5'' H leg openings.
